IDTronic – HF | NFC Embedded Module M890
The iDTRONIC HF | NFC Embedded Module M890 is a high-performance reader series that allows for embedding in various applications and devices. With its cutting-edge technology, it can read and write almost any 13.56 MHz transponders, making it suitable for a wide range of RFID applications. It features one external antenna port and supports common RFID standards such as ISO 14443A/B, ISO 15693, and ISO 18092/NFC. The module is available with multiple interface options and consumes less than 1 mA in low power mode. It comes with a useful SDK for easy development of applications. The HF Embedded Antennas are specifically designed for HF frequency areas and are perfect for integration into mobile devices, self-checkout systems, and mobile terminals.
These antennas are available in 7 different sizes, making them versatile and suitable for various systems and solutions. They can be used in both on-metal and off-metal applications. Additionally, customer-specific adjustments and completely new antenna development options are available. The antennas are also available as FLEX PCB Antennas, which are flexible and can be used on curved or angular surfaces. With a frequency support of 13.56 MHz and an impedance of 50 Ohms, these antennas provide reliable and efficient performance. The RF connectors can be either U.FL or 2-pin Molex, providing flexibility in connectivity options. Overall, the HF Embedded Antennas offer high-quality performance and customization options for a wide range of applications.
Specification
- Power Supply: 3.3 ~ 5 Vdc
- Power Consumption: < 100 mA, standby current < 1 mA (low power mode)
- Operating Frequency: 13.56 MHz
- Reading Distance: Up to 8 cm (depending on tag, antenna, and environmental conditions)
- Antenna: External
- Baudrate: 9600 … 115200 bit/s
- Interfaces: TTL, USB VCP, USB HID, RS232/485, PC/SC
- Supported RFID Standards: ISO 14443A/B, ISO 14443-4, ISO 15693, NXP MIFARE, ISO 18092/NFC, ISO 18000-3
- Operating Temperature: -20 degree C … +80 degree C
- Storage Temperature: -40 degree C … +85 degree C
- Humidity: Up to 95%, non-condensing
- MTBF: 200,000 h
- Dimensions: Antenna sizes vary from 20 x 30 mm to 80 x 80 mm
- Operating Temperature: -10 degree C to +55 degree C
Benefits
NFC Embedded Module M890 can be embedded in various applications and devices, such as handhelds, vending machines, ticketing systems, payment systems, access control, and e-charging. It offers flexibility and compatibility with different systems.
With its cutting-edge microcontroller and latest HF transceiver technology, the module provides reliable and efficient reading and writing of RFID tags. It supports multiple RFID standards, ensuring compatibility with a wide range of transponders.
The module is available with multiple interface options this allows for easy integration into existing systems and devices. The SDK provided by iDTRONIC simplifies the development of applications, making it user-friendly for developers.
Related Products
The ID CPR70 is a compact RFID hybrid module that serves as a multi-standard HF reader, supporting ISO 14443, ISO 15693, and ISO 18000-3M3 transponder types. It offers high-level support for various transponders and features digital outputs for external LED connections. With its variable interfaces (RS232-TTL and USB) and the option to use integrated or external antennas, this module provides flexibility for integration into different applications.
- Dimensions: 50 mm x 50 mm x 12.6 mm
- Weight: approximately 12 g
- MTBF: 500,000 hours
- Power supply: 5 V DC ±10%, Ripple: 0-250 kHz < 10 mVss; up from 250 kHz < 0.1 mVss
- Power consumption: less than 350 mA
- Operating frequency: 13.56 MHz
- Transmitting power: 450 mW
- Interfaces: USB Full-Speed (12 MBit/s), RS232-TTL (4,800 – 230,400 Baud)
- I/Os: 3 digital outputs; current per output: max. 12 mA; 2 LEDs (green, red); LED-OUT (red LED): max. 10 mA
- Supported transponders: ISO/IEC 1444-3, mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, NTAG, my-d move, JewelTM, FeliCa, Tag-It HFI, Fujitsu MB89R11x, STM24LRx, STMLRI2k, STM25, I-Code SLI/SLIX, I-Code ILT, I-Code DNA, NFC Devices in Card Emulation Mode (Tag Type 1-5)
- Software development kits: Windows (C++, .NET, Java), Linux (C++, Java), Raspberry Pi
- RFID interface: ISO 14443-A/-B (106-848 kBit/s), ISO 15693, ISO 18000-3M3
- Antennas: Internal integrated antenna, External U.FL connector for external 50 Ohm antenna
- Operating modes: ISO Host Mode (Polling Mode), Scan-Mode
- Radio license: Europe, UK (EN 300 330), USA (FCC 47 CFR Part 15), Canada (IC RSS-210)
- EMC: EN 301 489
- Safety & health: EN 62368-1, EN 50364
- Waste & hazardous substances: WEEE – 2002/96/EC, RoHS – 2011/65/EC
- USB drivers: Windows Server 2016 and 2019, Windows 10 and 11; 32/64 Bit
- Temperature range: Operation -25 degree C up to 70 degree C, Storage -40 degree C up to 85 degree C
- Relative air humidity: max. 95% (not condensing)
The HyWEAR compact sR is a basic barcode wearable that combines a compact barcode scanner with a comfortable fingerless glove. It is designed to make manual material handling processes more efficient by freeing both hands to perform work. The powerful optical engine can identify both 1D and 2D barcodes, and it is installed on a flexibly adjustable handcuff, leaving the user’s fingers, hand, and arm free to move. With easy integration into existing processes through Bluetooth 5.0, this wearable device offers a high level of convenience and productivity.
- Housing: Robust ABS material
- Dimensions: 60 mm x 50 mm x 23 mm (2.36 inch x 97 inch x 0.91 inch)
- Weight: Approximately 70 g
- Color: Black (translucent)/red
- Protection class: IP54
- Image resolution: 752 x 480 Pixel
- Reading field of view: 36 x 23
- Aimer: 650 nm Laser
- Barcode decoding: Supports 1D barcodes such as EAN-8, EAN-13, UPC-A, UPC-E, Code 128, Code 39, Code 93, Interleaved 2of5, and 2D barcodes including DataMatrix, QR Code, and PDF417
- Radio functions: Bluetooth 5.0 with protocols HID and SPP
- Signal indicator: Red/green/yellow/blue status LEDs, buzzer, and vibration feedback
- Battery: 1100 mAh Lithium-Polymer, 3.7 V
- Standard range*: Supports various barcode types at different distances depending on print quality, contrast, and lighting conditions
The ID MRU102-A / -USB is a compact and versatile UHF Universal Reader designed for short to medium read ranges. It features a small form factor with an internal antenna, but can also be connected to up to three external antennas for extended read ranges of up to 4 meters. With variable interfaces (RS232, USB), it can be easily integrated into existing systems. This reader supports the Low Level Reader Protocol (LLRP) and is suitable for a wide range of applications in various industries.
- Dimensions: 145 mm x 87 mm x 27 mm
- Power supply: 12 to 24 V DC, Power over Ethernet (PoE)
- Power consumption: max. 7 W
- Operating frequencies: EU (865 MHz to 868 MHz), FCC (902 MHz to 928 MHz)
- Output power: 50 mW to 500 mW, configurable
- Antenna connection: 3 x SMA plug (50 ohm), 1x internal antenna
- Interfaces: RS232 (-A) / USB Full Speed (-USB) / Ethernet (-PoE)
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode (-A and -USB), Notification Mode (-PoE)
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C
- Temperature range: Operation: -25 degree C up to +55 degree C, -25 degree C up to +45 degree C (PoE); Storage: -25 degree C up to +70 degree C
- Relative humidity: 5 % up to 95 % (non-condensing)
The HF Mid Range Reader ID MR102 is a compact multitag reader designed for various applications. It operates at a frequency of 13.56 MHz and can identify transponders according to ISO 15693. With a read range of up to 40 cm, it is suitable for middle-range applications. The reader features an anti-collision function, allowing it to read up to 30 transponders simultaneously. It offers numerous communication interfaces, including Ethernet (TCP/IP), USB, and RS232, making it easy to integrate into existing systems. The ID MR102 is available in both module and housing versions, with the housing version being suitable for industrial environments. It is ideal for use in retail, industry, logistics, and libraries.
- Dimensions: 85 mm x 145 mm x 31 mm
- Weight: 200 g
- Housing: Plastic ABS
- Color: Similar to RAL 9018 (Papyrus white)
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Transmitting power:2 W ± 1 dB
- Power supply:
- ID MR102-A/-USB: 12 up to 24 V DC
- ID MR102-PoE: 12 up to 24 V DC or PoE
- Power consumption: Max. 6 W
- Antenna connector: 1 x SMA connector (50 ohm)
- Supply voltage at antenna output: 7.5 V DC (max. 5 mA)
- Interfaces:
- ID MR102-A: RS232
- ID MR102-PoE: Ethernet (TCP/IP)
- ID MR102-USB: USB 2.0
- Indicators, optical: 1 LED (multicolored)
- Supported transponders: ISO 15693 / ISO 18000-3 Mode 1*, ISO 18000-3 Mode 3
- Reader modes: ISO Host Mode, Scan Mode, Notification Mode
- Others: Antenna shortcut detection, Temperature control, Full support of the external multiplexer ID ANT.MUX
- Temperature range:
- Operation: -25 degree C up to +55 degree C
- Storage: -25 degree C up to +85 degree C
- Relative air humidity: 5% up to 95% (non-condensing)
The ID CPR30+ Desktop Reader is a proximity reader designed for contactless data exchange with ISO 15693 and ISO 14443-A/-B compliant transponders. It is compact, reliable, and compatible with NFC applications. With its NFC High Power Mode, it offers enhanced reading ranges and improved reliability, making it ideal for use in offices, workstations, or at the point of sale. The reader is form, fit, and function compatible with ID CPR30 and is qualified according to Zhaga Book 24, commonly used in the lighting industry. It is powered and connected to a computer or other equipment via the USB interface.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW / 300 mW
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 150 mA / 220 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Indicators, optical: 2 LED (green / orange)
- Indicators, acoustic: Buzzer, integrated
- Supported transponders: ISO 15693, ISO 14443-A*/, ISO 14443-B
- Operation mode: Polling-Mode
- USB driver: Windows Server 2016 and 2019, Windows 10 and 11; 32 / 64 Bit
- Temperature range:
- Operation: -20 degree C up to +60 degree C
- Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The AT288N by ATID offers unparalleled efficiency in RFID data collection. With its advanced technology, this handheld reader empowers businesses to streamline their inventory management, asset tracking, and supply chain operations with precision and speed. Its ergonomic design ensures comfortable usage, while its robust build guarantees durability in various environments.
Elevate your RFID data collection capabilities with the AT288N by ATID. Engineered to excel in efficiency, this handheld reader revolutionizes inventory management, asset tracking, and supply chain operations. Its cutting-edge technology empowers businesses to capture data with unprecedented speed and accuracy, enhancing overall productivity and decision-making. Designed for user comfort and durability, the AT288N ensures seamless integration into diverse workflows, making it the ultimate solution for optimizing operational efficiency and gaining actionable insights.
- Supported protocols: UHF EPC Gen2, ISO / IEC 18000-6C, 6B, AEI (Rail)
- Connectivity: BT V2.1 + EDR / BLE V4.1
- Compatibility: Windows, Android & iOS Host
- Design: Compact & Handy design
- Drop: spec: 5m (5ft)
- IP65
- Reading Range: ~3M (According to Tag & Environment).
- Battery Life: a 3.7V 2,200mAh Lithium-Ion Battery (Rechargeable).
- Operating Temperature: -10degree C to 45degree C.
- Dimensions: 165mm x 75mm x 29mm
- Weight: 320 grams